Long-Lasting Glue & Remover Duo (Invisi)

BOND. SEAL. REMOVE.

The wait is over... get Khloé's iconic look to last for up to 7 days with our Bond & Seal duo. Remove and clean your Khloé Kardashian pre-mapped Lash Clusters with our ultra gentle 2-in-1 Bond Dissolver & Lash Nourisher. 

Khloé has designed this new wand with easy application in mind, allowing the 'bond' side of this duo to be applied to the base of your cluster for an even more precise and mess free application. Our 'seal' side locks your lashes in place once the Individual Clusters are applied.

Dual Ended Long Lasting Lash Adhesive:

The same formula you love, with a new applicator for an even more precise and mess free application. Brush the adhesive directly onto the cluster to create a seamless lash look that lasts up to 7 days with our latex free, fast drying formula. 

This adhesive has been designed to be used with individual lashes only. Please do not use with strip lashes.

Ingredients:
Bond Adhesive (Clear):
Acrylates Copolymer, Aqua (Water), Propylene Glycol.

Curing Seal (White Tip) :
Acrylates / Ethylhexyl Acrylate Copolymer, Aqua (Water), Propylene Glycol, Phenoxyethanol, Ethylhexyglycerin, Caprylyl Glycol.

2-in-1 Bond Dissolver (remover):

Infused with Rose Geranium Oil to nourish and hydrate, our oil-based Bond Dissolver & Lash Nourisher is formulated to work perfectly with our Dual Ended Lash Adhesive by breaking down the bond from your lashes and removing the lash clusters safely and easily. 

Our easy to use wand gently brushes the fast acting remover along the clusters and your natural lashes to break down any adhesive whilst leaving your lashes nourished and healthy.

Did you know that by removing adhesive from your lash clusters, you can get multiple wears out of them? Our gentle solution is safe and suitable for use on your Tatti Lashes cluster lash fibres.

Maximise the life span of your Khloé Kardashian Lash Clusters!

Patch Test at least 48 hours before use.

Ingredients: Isopropyl Palmitate, Polyisobutene, Isododecane, Microcrystalline Wax, Pelagronium Roseum (Rose Geranium) Oil, Phenoxteythanol.

IMPORTANT INFO:

- Latex Free

- Vegan & Cruelty Free

- Patch Test Before Use

- Works best without mascara to create a natural & seamless look

- Pairs perfectly with our Individual Clusters

- Size: 2x 3ml Bond & Seal

- Size: 1x 5ml Remover

- Shelf Life: 6 month (once opened)

- Keep out of reach of children

Dual Ended Temporary Lash Adhesive:

Before applying make sure your lashes are make up and oil free, and completely clean and dry. We recommend working on one eye at a time when applying Lash Clusters.

Patch Testing : We recommend completing a patch test before using our Dual Ended  Lash Adhesive. Simply apply a small amount of Adhesive to a small section of outer corner lashes and wait for 24 hours. If you experience any reactions/sensitivity, please discontinue use.

1. Gently loosen and peel your cluster from the tray using your fingers or applicator. We recommend loosening the cluster as close to the root as possible before removing from the tray.

2.  Brush a light coat of "Bond" from the Adhesive on to the base of the lash cluster. Focus the adhesive where the base of the cluster will connect with your natural lashes. Once the bond is applied, wait up to 30 seconds for the bond to go tacky.

Tatti Tip! We recommend working in sections, from either the outer corner of your eye or the inner corner of your eye, working across your lash line. Working in sections will give you time to apply the bond and clusters flawlessly.

Once you have completed one section, you can then apply the bond to the base of the next cluster and repeat.

3. Using your lash applicator, place the cluster underneath your natural lashes by lifting the lash cluster against the root of your natural lashes, using an up and out motion.

Make sure no adhesive is on the lash applicator as this will stick to the lash cluster. If you have glue on the applicator, make sure to clean this off in between lash applications as it can stick to the cluster and the applicator. We love our Adhesive Wipes for this.

Once you have applied all lashes to the eye you're working on, continue to step 4.

4. Apply the 'Seal' using a dabbing motion to the upper and lower sides of your finished lashes. Do not brush or pull the wand through your lash clusters. The seal will eliminate any sticky residue and cure the adhesive bond. ONLY seal the lashes where you've applied the Bond, taking care to avoid the tips of the lash clusters.

Wait a couple of minutes to let the cure work it's magic. Repeat this step if you feel the bond is still sticky/tacky.

Be careful not to apply the cure all the way through the lash cluster as it can leave a residue and cause the clusters to go hard and clump together.

5. Once your lashes are set in place, using your Lash Applicator clamp down the lashes to ensure they are secure and locked into place. Make sure you wipe down your lash applicator so there isn't any bond on it prior to clamping. When clamping, focus on the base of your natural lash line where the lash clusters are bonded to, as this will ensure your lashes will not lift or move, giving a long lasting finish (just like lash extensions!) Use the brush end to comb these through for a flawless finish. 

We recommend keeping your lashes away from water and steam for 24 hours after application, just like you would with lash extensions.

How To Use Remover: 

- Generously coat above and under your lash clusters with the remover, focusing on the areas where you placed the bond. 

- Wait for around 60 seconds for the remover to dissolve the adhesive bond. This will allow for a smooth, seamless removal. 

- Use a cotton pad and gently slide the lash clusters away from your natural lashes, using a downward motion. 

- Using the remover, brush through your natural lashes. Remove any final residue using a cotton pad. Repeat if needed. 

Order before 9pm to receive your order the following day (Monday - Thursday, UK only). Any orders placed after 7pm on Thursday will be delivered on Monday. Any orders placed after 7pm on Saturday will be processed on Monday for Tuesday delivery (as it is a next working day service).

Please see our delivery page for shipping times and prices for your region.