Our best selling Invisi-Lash Bond & Seal is now available in clear for a more subtle look. Not like your average adhesive, Invisi-Lash locks lashes into place for around 1 week.

The 'bond' side of our Invisi-Lash can be applied to the base of your natural lashes and our 'seal' side locks your lashes in place once Individual Clusters are applied.

After taking customer feedback on board we have updated our wands for an easier, mess free application. Our updated formula has a faster drying time which helps to speed up application.

So you get more out of your adhesive we've also increased the size of our packaging, meaning you get more for your money.

Perfect for pairing with our Individual Clusters to create a seamless lash look, especially our brown clusters for a softer lash look.

IMPORTANT INFO:

- Latex Free

- Vegan & Cruelty Free

- Patch Test Before Use

- Works best without mascara to create a natural & seamless look

- Pairs perfectly with our Individual Clusters

- Size: 2x 5G

- Shelf Life: 6 month (once opened)

- Keep out of reach of children

Tatti Tip! Make sure your applicator does not have glue on it for an easy application. We recommend wiping the applicator down regularly if glue build up does occur.

Please patch test before use. Instructions in the how to apply section.

*Please note the applicators of our Invisi Lash glue are subject to availability. We are in the process of changing over to our curved lash wand and we currently have a mixture of original and new stock. Both styles of Invisi Lash glue wands are designed for the application of the product and work really well, we are just making a few adjustments to the product.

Ingredients :
Bond Adhesive (White Tip) :
Acrylates Copolymer, Aqua (Water), Propylene Glycol.

Curing Seal (White Brush) :
Acrylates / Ethylhexyl Acrylate Copolymer, Aqua (Water), Propylene Glycol, Phenoxyethanol, Ethylhexyglycerin, Caprylyl Glycol.

Before applying make sure your lashes are make up and oil free, and completely clean and dry. We recommend working on one eye at a time when applying Invisi-Lash and Lash Clusters.

Patch Testing : We recommend completing a patch test before using Invisi-Lash. Simply apply a small amount of Invisi-Lash Bond to a small section of outer corner lashes and wait for 24 hours. If you experience any reactions/sensitivity, please discontinue use.

1. Brush a light coat of "Bond" from the Invisi-Lash Adhesive on your natural lashes. Focus the adhesive where the base of the cluster will connect with your natural lashes, if you are going for a more dramatic cluster you may need to take the adhesive further up the lash for a stronger hold. You do not need to brush the adhesive all the way up your lash. We recommend not applying mascara before the bond for a more natural & seamless look. 

Once applied, leave for 30-60 seconds for the adhesive to go tacky.

2. Gently loosen and peel your cluster from the tray using your fingers. We recommend loosening the cluster as close to the root as possible before removing from the tray. 

3. Place the cluster underneath your natural lashes by lifting the lash cluster against the root of your lashes, using an up and out motion. (Make sure no adhesive is on the tweezer as this will stick to the lash cluster. If you have glue on the tweezer, make sure to clean this off in between lash applications as it can stick to the cluster and the tweezers.)

Tatti Tip! We recommending using a tweezer that you feel most comfortable with for the application of lash clusters. 

4. Apply the "Seal" to eliminate any sticky residue and the cure the adhesive bond. ONLY seal the lashes where you've applied the Bond, taking care to avoid the tips of the lashes. Repeat this step until you feel all of the stickiness is gone. 

5. Once your lashes are set in place, using your Curved Invisi-Lash Applicator, clamp down the lashes to ensure they are fully bonded and secure. Make sure to focus on the base of the lash clusters, as this will ensure your lashes will not lift or move, giving a long lasting finish (just like lash extensions!)

Tatti Tip! Make sure your applicator does not have glue on it for an easy application. We recommend wiping the applicator down regularly if glue build up does occur.

How To Remove :

Our Invisi-Lash remover is formulated to work perfectly with our Invisi-Lash glue by breaking down the adhesive from your lashes and removing the lash clusters safely and easily.

1. Gently brush the remover wand coated with product along your lashes and clusters. Focusing on the areas where you placed the bond adhesive.

2. Wait for 30 seconds for the remover to dissolve the bond for a seamless, smooth removal.

3. Use a cotton pad to gently slide the clusters away from your lashes, using a downward motion.

4. Brush through your lashes again using the remover wand and remove any final residue with a cotton pad.

Tatti Tip! If you feel there is still residue on your lashes, you can soak cotton buds in the removal solution and brush through any remaining glue on your lashes. 

Don’t have the remover? Another method we recommend is using an oil based makeup remover which will break down the adhesive (same as lash extensions). Brush through your lashes with a clean mascara wand to break down the adhesive or dab with a cotton pad. Adding baby oil to your remover will help break down the glue.

Order before 9pm to receive your order the following day (Monday - Thursday, UK only). Any orders placed after 7pm on Thursday will be delivered on Monday. Any orders placed after 7pm on Saturday will be processed on Monday for Tuesday delivery (as it is a next working day service).

Please see our delivery page for shipping times and prices for your region.